chanduv23
06-19 12:00 PM
Your mom had GC in 80s? Why are you in EB queue? You should have gotten your GC by now. Just kidding:D
My dad had GC in 70s, he came and went back to India to pursue a lucarative job.
He is currently here on a visitor's visa and during the visa interview at Chennai, he showed his expired green card - and they confiscated it (after 30+ years of expiry)and gave him a tourist visa.
My dad had GC in 70s, he came and went back to India to pursue a lucarative job.
He is currently here on a visitor's visa and during the visa interview at Chennai, he showed his expired green card - and they confiscated it (after 30+ years of expiry)and gave him a tourist visa.
cartoon car wash clip art. A pig cartoon car washing with
pappu
08-02 12:28 PM
Best wishes.
cartoon car wash clip art. clipart cartoon eyes. cartoon
Can2004
08-03 10:19 AM
How often is finger printing required/asked for during the 485 process.
Thanks
Thanks
cartoon car wash clip art. Cartoon car with car wash sign
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
cartoon car wash clip art. with cartoon car wash
gc_chahiye
08-19 12:40 AM
I have problem with my lawyer too .I found out he made a mistake on my application concerning my information.my employer gave me the password so I checked my status on line.and when I asked him what gonna happen with my application .he were furious and he ask me who told you and he says thats not true.but I saw every thing with my proper eyes .any way he told me that next time if I wana talk to him I have to send him a check of 250 dollar the price of the consultation.then he can answer my question.and he told me that if he wana hurt me he can do it.I don't know what he means.and after I called my employer to tell him about the lawyer .today I foundout that the password for checking the status was changed. here's my story friends .plus my perm is pending for 127 day by now. please guys advice
if you are within 6 years of your H1 change jobs ASAP, you need a supportive employer at many stages in the GC process. As it is the ride is wild and painful, if your employer is also acting smart it can be horrible for you. Jump to a better employer (even if you take say a 10% hit in pay) and restart GC asap.
if you are within 6 years of your H1 change jobs ASAP, you need a supportive employer at many stages in the GC process. As it is the ride is wild and painful, if your employer is also acting smart it can be horrible for you. Jump to a better employer (even if you take say a 10% hit in pay) and restart GC asap.
cartoon car wash clip art. Cartoon Clipart
shortchanged
08-28 12:14 PM
Now that I do have receipts- should I go ahead and stop payment on the 2nd set??
I would wait until your money is actually deducted from the bank account to be 100% sure that there is no issue with regards to your checks.Then possibly you could ask for stop payments on your check.
Actually I have read before in UsCIS site that they will try to resubmit the check one more time before rejecting or accepting the forms.So hopefully they will resubmit it again, and since you have reversed your stop payment everything should be OK with your july2 filing. Again it is very reassuring that you have got the Receipts, and that is a sign that it was indeed properly filed, because they reject anything which was improperly filed.
In my case the money is already deducted from the bank account, and I have check cashed images online. so I have asked for stoppayments,yeah it cost me 150 bucks for 5 checks ouch...
I would wait until your money is actually deducted from the bank account to be 100% sure that there is no issue with regards to your checks.Then possibly you could ask for stop payments on your check.
Actually I have read before in UsCIS site that they will try to resubmit the check one more time before rejecting or accepting the forms.So hopefully they will resubmit it again, and since you have reversed your stop payment everything should be OK with your july2 filing. Again it is very reassuring that you have got the Receipts, and that is a sign that it was indeed properly filed, because they reject anything which was improperly filed.
In my case the money is already deducted from the bank account, and I have check cashed images online. so I have asked for stoppayments,yeah it cost me 150 bucks for 5 checks ouch...
more...
cartoon car wash clip art. Vector art, clipart real
cool_guy_onnet1
02-12 08:41 AM
No FP Yet, July 22nd Filer. I tried CSR # few times and finally got hold of someone who was kind -enough.
According to her, there are LOT OF PEOPLE in the same boat and she recieves this phone call more than any other queries.
She said, all she can do is to request Service center for FP status but here is the glitch, Request from CSR to Service Center takes 90 days to process and count another 90 days for the response to be read by CSR and issue a new FP.
Again, she kept saying that these are just numbers from top of her head and nothing is written on stone.
Hope this helps-
According to her, there are LOT OF PEOPLE in the same boat and she recieves this phone call more than any other queries.
She said, all she can do is to request Service center for FP status but here is the glitch, Request from CSR to Service Center takes 90 days to process and count another 90 days for the response to be read by CSR and issue a new FP.
Again, she kept saying that these are just numbers from top of her head and nothing is written on stone.
Hope this helps-
cartoon car wash clip art. Cartoon car wash - vector
pappu
06-12 04:09 PM
This meeting is very important especially in light of recent remarks from Sen. Harry Reid. We have to find out more information on the background discussions on this. There is a possibility that either Administration is serious about it and wants to give time for people to come with a consensus or this delay may cost us this year's CIR.
more...
cartoon car wash clip art. stock vector : Cartoon car
va_labor2002
09-25 03:12 PM
I see no harm in contacting him; but your excitement about Chandrasekharan seems curious to me. When people who have themselves immigrated from India (who now have GC/citizenship) are so indifferent about us, how can you expect a second generation indian journalist to "understand" our problems ? He does not seem to have done any articles on immigration; so there is no objective way for us to say whether he is really sympathetic to us or not.
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
I totally agree with you. But there is no harm in trying with him.He may be or may not be sympathetic to us.We don't know that ! He sees to be a smart journalist. If he is nice and sympathetic to legal immigrants,you may see a front page article about legal immigrants in Washington Post. Hope for the Best !
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
I totally agree with you. But there is no harm in trying with him.He may be or may not be sympathetic to us.We don't know that ! He sees to be a smart journalist. If he is nice and sympathetic to legal immigrants,you may see a front page article about legal immigrants in Washington Post. Hope for the Best !
cartoon car wash clip art. Happy Car In A Car Wash
omved
08-14 07:10 PM
Hi Friends,
While filing I 131, I came across this information
"{If you are in the United States and wish to travel abroad, you do not need to apply for advance parole if both conditions described below in A and B are met:
A. You are in one of the following nonimmigrant categories:
1. An H-1, temporary worker, or H-4, spouse, or child of an H-1; or
2. An L-1, intracompany transferee, or L-2, spouse or child of an L-1; or
3. A K-3, spouse, or K-4, child of a U.S. citizen; or
4. A V-2, spouse, or V-3, child of a lawful permanent resident; and
B. A Form I-485, Application to Register Permanent Residence or Adjust Status, was filed on your behalf and is pending with USCIS.
However, upon returning to the United States, you must present your valid H, L, K, or V nonimmigrant visa and continue to remain eligible for that status}"
My 797 petition is approved till 2011 but my H1B visa is not stamped. I am planning India trip in November. What would be appropriate for me..
Should I get H1B stamped in Mexico / Canada / India
OR
Should I apply for AP.
I have heard that after applying AP we should really not leave the country until decision has been made on AP application. I fear if I apply for AP now, probably it would not be approved by first week of November.
I don't know what to do. Any help pls..
Thanks
Omved
1485 ND august 15, 2007 in NE - No LUD so far. Infopass appointment confirmed FP/back ground check completed
H1b 7th year in extension
EB 2 - PD April 06
While filing I 131, I came across this information
"{If you are in the United States and wish to travel abroad, you do not need to apply for advance parole if both conditions described below in A and B are met:
A. You are in one of the following nonimmigrant categories:
1. An H-1, temporary worker, or H-4, spouse, or child of an H-1; or
2. An L-1, intracompany transferee, or L-2, spouse or child of an L-1; or
3. A K-3, spouse, or K-4, child of a U.S. citizen; or
4. A V-2, spouse, or V-3, child of a lawful permanent resident; and
B. A Form I-485, Application to Register Permanent Residence or Adjust Status, was filed on your behalf and is pending with USCIS.
However, upon returning to the United States, you must present your valid H, L, K, or V nonimmigrant visa and continue to remain eligible for that status}"
My 797 petition is approved till 2011 but my H1B visa is not stamped. I am planning India trip in November. What would be appropriate for me..
Should I get H1B stamped in Mexico / Canada / India
OR
Should I apply for AP.
I have heard that after applying AP we should really not leave the country until decision has been made on AP application. I fear if I apply for AP now, probably it would not be approved by first week of November.
I don't know what to do. Any help pls..
Thanks
Omved
1485 ND august 15, 2007 in NE - No LUD so far. Infopass appointment confirmed FP/back ground check completed
H1b 7th year in extension
EB 2 - PD April 06
more...
cartoon car wash clip art. Cartoon Clipart
krishmunn
05-11 08:24 AM
Ask your attorney to draft the experience letter. It may not be copied toto but support letter should cover the main points in the draft.
cartoon car wash clip art. CAR WASH (click image to zoom)
daramesh
10-07 12:49 PM
there are two things about visa one is stamp and other is status. if you maintained the same status in USA as you are going for stamping you will answer yes.
eg. you had a H1 stamp that expired in 2006 but you had extended that status and only now getting it stamped then you will answer yes.
but if you had a prev stamp of F1 and then changed to H1 and going for H1 stamping then you will answer no.
For H4 are they asking sepeartely, because you will answer yes in your case and then add yoor daughter to your appointment.
You are only answering for yourself when you say yes, i dont think there is any misrepresentation involved.
waitintoolong, but the question is
" "Are you applying for same visa class that expired in the last 12 months?"
he is talking about VISA STAMP not the status. are you sure about answering YES if my visa stamp had expired more than 12 months back but my status is valid?
my visa stamp expired in 2005 itself. I extended my status till 2008. so my answer is should be NO right? (although I wish I could say YES, because first time H1 applicants are having difficulty getting appointments)
can you or someone else confirm the answer? has anyone asked VFS/consulate about this?
thanks
eg. you had a H1 stamp that expired in 2006 but you had extended that status and only now getting it stamped then you will answer yes.
but if you had a prev stamp of F1 and then changed to H1 and going for H1 stamping then you will answer no.
For H4 are they asking sepeartely, because you will answer yes in your case and then add yoor daughter to your appointment.
You are only answering for yourself when you say yes, i dont think there is any misrepresentation involved.
waitintoolong, but the question is
" "Are you applying for same visa class that expired in the last 12 months?"
he is talking about VISA STAMP not the status. are you sure about answering YES if my visa stamp had expired more than 12 months back but my status is valid?
my visa stamp expired in 2005 itself. I extended my status till 2008. so my answer is should be NO right? (although I wish I could say YES, because first time H1 applicants are having difficulty getting appointments)
can you or someone else confirm the answer? has anyone asked VFS/consulate about this?
thanks
more...
cartoon car wash clip art. Cartoon car washing with
txh1b
08-17 05:39 PM
One looks like a PM position involving lot of admin stuff and the other sounds technical enough. May have problems using AC21.
cartoon car wash clip art. Cartoon car wash - vector
jfredr
07-26 01:49 PM
my colleague whose 485 was mailed on june 27th had his checked cleared yesterday.
more...
cartoon car wash clip art. Vector Clip Art Picture of a
h1b_forever
09-13 02:08 PM
It is so frustrating to not have a receipt for Jul2 filing yet. Should be poll to see how many are still waiting
cartoon car wash clip art. We couldn#39;t be more pleased to
Jamin
08-16 09:56 AM
I had a similar situation and Bank of America CS sent me a good image of the check. Check with your bank as well by calling their CS.
CALLED USCIS .they said they cant transfer to level 2 operator to check receipt number...Is there any other way to find out?...will the bank be able to read and tell?
Thanks
CALLED USCIS .they said they cant transfer to level 2 operator to check receipt number...Is there any other way to find out?...will the bank be able to read and tell?
Thanks
more...
cartoon car wash clip art. Car Clipart #74314 by BNP
kshitijnt
07-27 02:46 PM
Hi,
My I-140/I-485 are pending. I had also applied for my EAD card which I received promptly. The EAD card will expire in October, 2008. You know, at least until the I-140 gets approved, I don't need the EAD card. Can I just let it expire and renew it when I need it? Or will it be a separate application when I try to renew an expired EAD.
Thanks.
If your renewal requires fees, I would not get it approved.
My I-140/I-485 are pending. I had also applied for my EAD card which I received promptly. The EAD card will expire in October, 2008. You know, at least until the I-140 gets approved, I don't need the EAD card. Can I just let it expire and renew it when I need it? Or will it be a separate application when I try to renew an expired EAD.
Thanks.
If your renewal requires fees, I would not get it approved.
cartoon car wash clip art. Happy blue cartoon car washing
painful_GC
03-10 07:59 PM
Hi many thanks again..how long does it take in total for COS from H1B to L1B ?? and then to get an EAD ??
cartoon car wash clip art. cartoon car wash clip art. stock vector : Car wash; stock vector : Car wash. R94N. Nov 6, 04:42 AM. I just snagged Lifehacker#39;s new(ish) wallpaper.
rsrikant
07-20 10:17 AM
hi,
i can't open this link...
http://www.uscis.gov/portal/site/usc...0ecd19 0aRCRD
please give me the right link.. thanks.
i can't open this link...
http://www.uscis.gov/portal/site/usc...0ecd19 0aRCRD
please give me the right link.. thanks.
dpsg
03-06 08:46 PM
Buddy,
I know pessimism sometimes is hard on people who is giving everything to cause... But again concentrate on work we are doing. Ignore doom/gloom
from some members, because if you show them light at the end of tunnel,
many sitting on the fences will join... again suggest don't worry about it &
concentrate on goals/objectives.
good luck.
I know pessimism sometimes is hard on people who is giving everything to cause... But again concentrate on work we are doing. Ignore doom/gloom
from some members, because if you show them light at the end of tunnel,
many sitting on the fences will join... again suggest don't worry about it &
concentrate on goals/objectives.
good luck.
zoozee
07-07 10:48 PM
While on AoS, are we classified as US Resident - as long as we pass the IRS resident test of presence in US.
Thank You and best wishes
Thank You and best wishes
Комментариев нет:
Отправить комментарий